One HUD Design – Many Windshields

One HUD Design – Many Windshields

At the SID Vehicle Displays and Interfaces (VDI) Symposium and Exhibition, Renuka Manjula Narayanan from the University of Rochester described a HUD architecture that uses an LCoS spatial light modulator (SLM) to complement the free-form aspheric collimating primary mirror in a conventional HUD design, which must be redesigned for each windshield configuration. By adding the spatial light modulator in the optical path, the phase of the light can be carefully adjusted to allow a single HUD design to work across multiple automotive platforms with different windshield configurations. The design will also allow for dynamic distortion corrections to optimize the image as the pupil moves around the eyebox.

Because commercial SLM apertures are small, the design uses a two-mirror relay that demagnifies the beam onto the SLM and then re-magnifies it. Swapping a nominal windshield for a highly curved, steeply raked sports-car windshield degraded MTF at 6 lp/mm. Re-optimizing only the SLM phase map recovered it to above 35% with no hardware change. The pipeline from windshield data to phase map is automated, and one static map covers six sampled eyebox positions, so no eye tracking is needed.

Previous
A Screenless DLP HUD Design
Next
Chief Tech Describes 3D HUD and AI Design Process